Bridge kits
MT-F1595: Rooftop Coaxial Cable Bridge Kit, 12 runs, 12-gauge cover
The tray itself: an 8 ft galvanized channel with a 12-gauge cover, hardware and three sleepers. Sits on the roof without penetrations. Sized by the number of coax runs.
| Product type | Bridge kit |
|---|---|
| Cable runs | 12 |
| Holes | 12 |
| Mounting | Non-penetrating |
| Material | Galvanized steel |
| Length | 96 in | 2438.4 mm |
| Width | 35 in | 889 mm |
| Height | 7 in | 177.8 mm |
| Included | Channel, Hardware, Sleepers (3) |
| Packaging quantity | 1 |
| Net weight | 180.338 lb | 81.8 kg |
| Wind rating | Not published. Contact your ANDREW representative. |
| Compliance | ISO 9001:2015 |
| Spec sheet revised | 2026-10-19 |
| Hardware dead load | 22.5 lb/ft (net weight ÷ 8 ft, before cables) |
Check before you order
- Sheet revised 2026-10-19, the newest in the line. Re-pull it before you submit.
- No extension kit (vertical hinge) is listed for the 12-run size. Ask ANDREW how a 12-run bridge goes over a curb or parapet before you route one across a level change.
Install notes for this part
- Sized by coax run count. Pick the smallest kit that holds today's runs plus your growth allowance (see the estimator).
- Each 8 ft kit ships with its own three sleepers. Put them on the membrane protection your roof manufacturer has approved, never straight on the membrane.
- Join sections with the matching adjustable splice (MT-F1597). Count one splice per joint.
- Don't field-cut a section to length without ANDREW's written OK. The warranty excludes modifications it hasn't authorized in writing (§8(g)). If a cut is approved, touch it up with zinc-rich coating per ASTM A780.
Used with
- MT-F1597: Adjustable Splice for Bridge Kit, 12 runs
Other bridge kits
- MT-F1542-11: Rooftop Coaxial Cable Bridge Kit, 4 runs, 12-gauge cover
- MT-F1543: Rooftop Coaxial Cable Bridge Kit, 8 runs, 12-gauge cover
Source: ANDREW spec sheet MT-F1595 (PDF), revised 2026-10-19 · manufacturer product page. Warranty: see warranty requirements.